Technical Specifications:
Accuracy : Class 1 [+/- (1% of full scale +1count)]
Resolution: 1 count in 100 or better
Display : 3 Digit 7 seg. display
Triac(motor) : Max. 6 Amp.
Weight: 270 gms (approx)
Dimensions : 96 x 96 x 65 (D) mm
CT Ratio: 5 Amps. – 900 Amps.(programmable)
Panel Cutout : 92 x 92 mm
Trip relay: 5 Amp. potential free
Buzzer: 12 V DC (Optional potential free)
Burden: 0.5 VA max.
Mounting: Panel Mounting
Ambient : 0-50 º C humidity < 95%
| Reduces assembly & wiring time by 80%. |
Reduce Inventory no control cards, etc. |
Tried-Tested & Accepted by leading OEMS approved by DGS&D |
Features:
• Wide Range of Aux Supply from 85-280V AC (with built-in SMPS).
• Standard cut out(92 x 92) with low depth-65 mm.
• Digital Multi-Parameter Meter with 3 digits 7 segment Bright displays for – a) Input Voltage, b) Output Voltage, c) Output Current
• Alarm & Fault indication by LEDs for – a) Over Load, b) Over Voltage, c) Under Voltage
• User programmable parameters:
Digitally programmable at the site with push buttons on the front panel.
a) Output voltage
b) Hysteresis- range- 0.5 to 5 V
c) Under Voltage cut out
d) Over Voltage cut out
e) Over Load cut out
f) Over Load latch/auto re-set with delay
g) Trip Delay Timer
h) On Delay Timer
i) CT Ratio selectable
j) Password protection
k) On delay time.
• Motor drive- Triac based servo motor drive.
• Manual mode for field testing.
• Audio- Visual Alarm with Acknowledge / Silent
• Panel mount Ergonomic design with easy-to-operate keys
BPS Servo Controller -Digital is a total metering and control solution for servo stabilizers for a wide range of input voltage and wide range of load requirements. This reduces Designed with the latest micro-controller technology the servo controller integrates multi-parameter meters and servo AC synchronous motor controller driver.
production overheads like wiring and testing and increases the production rate of the voltage stabilizers.
TYPICAL CONNECTION DIAGRAM FOR MODEL: BSVC-1PVA-3.1 |
 |
TYPICAL CONNECTION DIAGRAM FOR MODEL: BSVC-1PVA-4.1 |
 |
 |
Advantages
| • Single device for metering and control. |
| • No need for PCBs, Switches, Meters. |
| • Reduces assembly & wiring time by 80%. |
| • Reduces manufacturing cost by 70%. |
| • Password protection for securing mishandling by unauthorized persons. |
| • Generation NEXT look of the finished product. |
| • Enhances reliability. |
| • Same controller for any voltage or capacity range thus reduces inventory counts. |
| • Scrolling & Hold option for Display. |
| • Easy for servicing/replacing at the site. |
Subhodeep Saha –
Very Good Product